METAL FENCE PANELS: EFFECTIVE AND DURABLE SOLUTIONS
You are looking for metal fence panels. Scroll down the list we selected for you. You can filter the selection, be depending on your needs: profiled panels, flat panels, decorative panels, high-security panels. The metal fence panels widest choice on the market.
SECURITY 3D R
Security 3D R is a reinforced wire mesh panel designed to deliver longer resistance against breach attempts through added wire mesh strips welded on across the panel.
– Extra protection and reinforcement
– Breakthrough, vandal, and scaling resistant
– Cost-effective system
Reinforced rigidity and protection
Security 3D R features an additional wire mesh strip welded, at intervals, to the front panel to significantly increase the system’s rigidity and protection levels.
Breakthrough and scaling resistant
The small apertures make the panel both difficult to climb and time-consuming to cut. The added double strips deliver additional resistance to breakthrough attempts.
The 3 m wide panels mean fewer panels and posts are required over long distances when compared to traditional 2.5 m wide panels and conform to insulator spacing requirements for electric fence installations. Its higher rigidity removes the necessity of top rails.
Visibility and aesthetics
Despite the small mesh apertures, the system appears almost invisible and delivers a clear view when combined with surveillance systems.
Full system 10-year guarantee (standard terms & conditions apply)
Superior coatings underpin our 10-year anti-corrosion guarantee when the full system (panels, Kingcats Secure posts, and fixators) is used
Ideal for educational facilities, critical infrastructure, energy & resources, data centers, and oil & gas.
The panels are reinforced welded wire mesh of 3 m width and 2.4 m height. Made from 3 mm diameter KINGCATS® Super wire with apertures of 76.2 mm x 12.7 mm (12 mm x 12 mm in the double-layered strip) which makes it time-consuming to break through and difficult to climb.
Additional reinforcing wire mesh strips (76.2 mm wide) are welded onto a Securifor panel at intervals of 304 mm or 228 mm, depending on the number of strips per panel.
TWO PANEL VARIATIONS
– V8 has 8 strips welded onto the panel at intervals of 304 mm
– V10 has 10 strips welded onto the panel at intervals of 228 mm.
Increasing the number of reinforced wire mesh strips per panel proportionately increases the system’s breakthrough resistance and strength.
|Panel||Panel size |
W x H
|Post length||Panel bends||Double strips / panel|
|V8||3050 x 2400||3||3000||4||8|
|V10||3050 x 2400||3||3000||4||10|